Engraving perfect circles and arcs just became a one-man operation using the Precision Center Pivot and your Engrave-A-Crete saw with Dynamic Directional wheels.

  • 12” square skid-resistant, non-marring base

  • No need to attach to the concrete for most engraving. Simply add a bucket of weight for intricate designs

  • Open center sight allows accurate placement

  • Exact reference points for precision cuts easily located

  • Twin parallel connecting tubes attach to cutting tool

  • Multiple connecting tubes can be added for large arcs and circles

  • Connecting tube wheels support long tube extensions to prevent drag and sag

 

Engraving perfect circles and arcs just became a one-man operation using the Precision Center Pivot.

The aluminum 12” pivot provides smooth, accurate action and features a rubber, non-skid base that’s heavy enough to remain in place without attaching to the floor.

When additional weight is required for intricate patterns, a bucket of weights set atop the bucket tray won’t interfere with maneuverability.

Twin connecting tubes stabilize the Precision Center Pivot to eliminate racking. Located in the exact center is a sighting hole and alignment “cross hair” for precise marking and engraving.

Parallel connecting tubes extend to attach the pivot to the cutting tool.

Multiple connecting tubes can be added to perfectly cut large arcs and circles. Optional connecting tube support wheels support long tube extensions, preventing connecting tube drag on the slab.

Pivot Assembly:

  • Aluminum base plate with rubber skid reducing pads
  • 12-inch plate bearing
  • Aluminum main body

 

  • Aluminum tube clamp ring
  • Aluminum tube spreaders(2)
  • 48-inch connecting tubes (2)
  • 20-inch connecting tubes (2)
  • 3-1/2-inch tool connecting tube
  • 3/8”-16 x 3/4” bolts (2)
  • 3/8”-16 x 1-1/4” star knobs (6)
  • 3/8”-16 serrated flange nuts (3)
  • 3/8”-16 washer
  • HDPE plastic bucket tray (Fig. 2)

Additional 20”, 48” or 60” connecting tubes (pair)

Tube spreader

Dynamic Directional connecting tube support wheel

Recommended: Dynamic Directional wheel kit for cutting tool; allows for easier one man operation. (Part #SC 182)

Precision Center Pivot

Engraving perfect circles and arcs just became a one-man operation using the Precision Center Pivot. The aluminum, 12” square pivot provides smooth, accurate action and features a rubber, non-skid, non-marring base that’s heavy enough to remain in place without attaching to the floor.  Multiple connecting tubes can be added to perfectly cut large arcs and circles. Connecting tube support wheels support long tube extensions, preventing connecting tube drag on the slab.

Model #: MGX-96 $995.00

Side View Top View

 

Top View with Bucket Attachment