Mongoose X Saw

• Straight Lines
• Tile Designs
• Slate / Block
• Random Block
• Random Ashlar Slate
• Running Bond Block
• Geometric Designs
• Perfect Circles – using center pivot
• Perfect Arcs – using center pivot
• Squares
• Triangles
• Rectangles
• Polygons

Removable Handle

Ergonomically designed with the operator in mind. Eliminates muscle strain. Handle removes with only 2 set screws for rapid transition to a low profile engraver for confined spaces. Handle sold separately.

Ease of Use Spring-Loaded Cutting Head

Spring-loaded cutting head gives the operator full control of starts and stops. Simply push down to cut, then release and the blade pops out of the cut. On-the-fly adjustments with just the turn of a screw.

Vacuum Port Positioned for Optimum Dust Uptake

Catches dust at the source for dust free cutting. Reduces adverse profiling of the blade. Side mount keeps vacuum out of the way during cutting.

Powerful Motor

Upgraded motor has up to 50% more torque and up to 20% higher overload capacity for quicker material removal and longer service life.

Precision Machined

INTELLIGENT ENGINEERING: Axle holes are tapped (threaded) at the same time the Mongoose X is machined, resulting in a rigid, accurate and smooth rolling chassis. Made in the USA from solid blocks of 6061-T6 billet aluminum on state-of-the-art milling and turning centers at the Engrave-A-Crete machining and manufacturing facility. So perfectly crafted that it requires no polishing---but it is.

Blade Port

For the operator who prefers to see the blade during cutting.

Wide High Traction Wheels

Top of the line, Hy-Grade urethane wheels increase stability and traction

Specifically tuned to match the motor, the 79mm diameter (3.1") blade gives increased torque while cutting and less kerf-ramp when ending cuts.

Blades should last an average of 20,000 linear cutting feet.

Blade life will vary based on depth of the cut and hardness of the concrete.

It is best to wait until the concrete is at least 5 days old - fresh concrete can ravel on the edges.

Blade widths:

1/16" - .090"

1/8" - .125"

1/4" - .250"

3/8" - .375"

Maximum cutting depth is 1/4"

Power: 120V 10.5A or 230V 3.9A 50/60hz

Size: 13" x 7.75" x 9.5" (LxWxH)

Weight: 15.82 lbs

Min. Side Cut: 4"

Min. Front Cut: 4.5"

Smallest Circle with Center part of Center pivot is approx. 7" radius

PROPACK INCLUDES:

• Mongoose X Concrete Engraver
• Removable Handle
• .090 Premium USA Diamond Blade
• .125 Premium USA Diamond Blade
• .250 Premium USA Diamond Blade
• .375 Premium USA Diamond Blade
• Center Pivot and 6 Connecting Tubes
• Trammel Point Layout Kit
• Extension Handle On/Off Switch
• Custom Storage Locker