Color-Enhancing Concrete Paste Wax – 5 lb Low-Sheen Interior Floor Finish
Color Enhancing Concrete Wax is the ideal solution for those looking to elevate their concrete surfaces while adhering to eco-friendly practices. Crafted from natural waxes sourced from renewable resources, this product stands out as a sustainable alternative to traditional floor finishes. Designed with safety in mind, it is non-flammable and non-combustible, making it perfectly suited for any interior space.
This floor wax boasts a low gloss level, providing a subtle sheen that enhances the natural beauty of your concrete surfaces without overpowering their original charm. Its versatility makes it suitable for a wide range of applications, whether you're working with acid-stained concrete, integral colored concrete, micro toppings, plain gray concrete, or smooth masonry surfaces. The product is easy to apply, allowing for a hassle-free experience that enhances your floors quickly and effectively.
Bring out the natural movement, color, and warmth in decorative concrete with Concrete Resurrection Color-Enhancing Concrete Paste Wax. This 5 lb can contains a renewable, petroleum-free paste wax designed to enrich compatible interior concrete while leaving a soft, natural low-sheen finish.
Unlike a liquid mop-on floor finish, this is a professional buffable paste wax. It applies in a very thin coat, dries quickly, and buffs to a rich, even appearance that can be renewed only where the floor needs attention.
Ideal for fully clean, dry interior acid-stained concrete, integrally colored concrete, microtoppings, plain gray concrete, and smooth masonry surfaces.
PRODUCT HIGHLIGHTS
-
Color-enhancing, low-sheen finish—adds richness without a glossy “wet look”
-
Made with natural waxes from renewable sources; contains no petroleum-based waxes
-
Buffable finish that can be refreshed in worn or scuffed areas
-
Approximately 500–1,000 sq. ft. of coverage per 5 lb can, depending on surface texture and porosity
-
Suitable for decorative interior concrete, microtoppings, smooth masonry, and more
-
Interior use only
HOW TO APPLY
-
Make sure the surface is fully clean, dry, and free of dust, oil, grease, and other contaminants. Acid-stained concrete must be properly neutralized, cleaned, and dried before waxing.
-
Apply a small amount of wax in a very thin, even coat. Avoid heavy application.
-
Allow the wax to dry for approximately 20–40 minutes.
-
Buff to the desired low sheen. For larger areas, use a low-speed 175 RPM floor machine with the appropriate buffing brush. Use a clean cotton cloth for edges, corners, and small touch-up areas.
MAINTENANCE
Dust mop regularly with a microfiber mop to remove grit that can dull the finish. Damp mop as needed with Concrete Resurrection Clean Living Essentials pH-Neutral Cleaner. Avoid harsh, acidic, alkaline, or abrasive cleaners.
For light scuffs, buff the area with a clean soft cloth. When a small area becomes dull, clean it, apply a very thin touch-up coat of wax, allow it to dry, and buff—there is no need to re-wax the entire floor.
IMPORTANT
This product is an interior, buffable paste wax. It is not a liquid mop-on floor finish and is not intended for exterior use.
For use on:
- Acid stained concrete
- Integral colored concrete
- Micro toppings
- Plain grey concrete
- Smooth masonry surfaces
Benefits
- Natural Waxes from renewable sources
- No petroleum based waxes
- Breathable sealer
- Natural antimicrobial properties
- Simple application
- Simple maintenance
500-1000 sqft per 5 LB can. Coverage variation is based on the texture and porosity of the floor.
Concrete must be clean and free of dirt, dust, oil, grease, mold and mildew, and any other contaminants. Acid stained concrete must be neutralized, thoroughly cleaned, and dry prior to waxing.
Tools needed:
- Floor Machine - Low speed (175 rpm)
- Bassine Brush
- Union Mix Brush
- Soft cotton cloth
Apply roughly a quarter cup of wax directly to the floor. Set the floor machine with Bassine brush on top of the wax dollop. This prevents the wax from being flung away from the brush. Spread the wax to a uniform appearance being careful to not leave any ridges of wax behind. Repeat this process in small sections throughout the entire floor. Walls, corners and edges can be had applied using a soft cotton cloth.
Allow the wax to dry (approximately 20-40 minutes), you will notice the floor during initial application becomes very dark when the color lightens up uniformly you may begin the buffing process. Or in some cases, such as rough floors you may wish to add a second coat to the floor prior to buffing.
Once dry, buff the floor using the Union Mix brush. A nice low sheen gloss will develop immediately. Edges and corners that cannot be reached with the Union Mix brush can be hand buffed using a clean cotton cloth.
OPTIONAL: To develop a slightly higher gloss the floor wax can be buffed using a high speed burnisher (1500-2000 rpm) using a pad designed for soft finishes.
Dust mop using a microfiber pad, wet mop using Concrete Resurrection Decorative Concrete Day to Day Floor Cleaner CR-587. Do not use harsh chemicals or cleaners on the waxed floor.
Scuffs and marks can be buffed out using a soft cotton cloth. Dull spots can be fixed by hand applying additional wax and then buffing with a soft cotton cloth.
Choose options